Bewise Inc. www.tool-tool.com Reference source from the internet.
| AH-1 HueyCobra/Cobra | |
|---|---|
 A Bell AH-1G HueyCobra | |
| Type | Attack helicopter |
| Manufacturer | Bell Helicopter Textron |
| Maiden flight | 1965-09-07 |
| Introduction | 1967 |
| Status | Active service |
| Primary users | United States Army Japan Self Defense Forces Republic of Korea Army Israeli Air Force |
| Produced | 1967-present |
| Number built | 1,116 |
| Developed from | UH-1 Iroquois |
| Variants | AH-1 SuperCobra Bell 309 KingCobra |
The AH-1 Cobra is an attack helicopter manufactured by Bell. It shares a common engine, transmission and rotor system with the older UH-1 Iroquois (nicknamed "Huey"). The AH-1 is also sometimes referred to as the "HueyCobra" or "Snake".
The AH-1 was once the backbone of the United States Army's attack helicopter fleet, but has been replaced by the AH-64 Apache in Army service. Upgraded versions continue to fly with several other users. The AH-1 twin engine versions remain in service with United States Marine Corps as the service's primary attack helicopter.
[edit] Development
[edit] Background
Closely related with the development of the Bell AH-1 is the story of the Bell UH-1 — predecessor of the modern helicopter, icon of the Vietnam War and still one of the most numerous helicopter types in service today.
The UH-1 made the theory of air cavalry practical, as the new tactics called for US forces to be highly mobile across a wide area. Unlike before, they would not stand and fight long battles, and they would not stay and hold positions. Instead, the plan was that the troops carried by fleets of Hueys would range across the country, to fight the enemy at times and places of their own choice.[citation needed]
It soon became clear that the unarmed UH-1 troop helicopters were vulnerable against ground fire from Việt Cộng and North Vietnamese troops, particularly as they came down to drop their troops in a landing zone. Without friendly support from artillery or ground forces, the only way to pacify a landing zone was from the air, preferably with a machine that could closely escort the transport helicopters, and loiter over the landing zone as the battle progressed. By 1962 a small number of armed UH-1As were used as escorts, armed with multiple machine guns and rocket mounts.[1]
The massive expansion of American military presence in Vietnam opened a new era of war from the air. The linchpin of US Army tactics were the helicopters, and the protection of those helicopters became a vital role.[2]
[edit] Bell 207 Sioux Scout
Bell had been investigating helicopter gunships since the late 1950s and revealed a mockup of its helicopter gunship concept, named "Iroquois Warrior" in 1962. The design featured a long, slender body with stub wings and a two seat tandem cockpit. It was armed with a chin mounted grenade launcher. A 20 mm belly cannon and munition mount points on the stub wings were also planned.[3]
The U.S. Army was interested in the concept and awarded Bell a proof of concept contract in December 1962. The role of this new helicopter was to protect the troopships and to wield a full combat capability of its own. Bell's first design was built around a modified Model 47, leading to the sleek Model 207 Sioux Scout which first flew in July 1963.[4]
The Sioux Scout had all the key features of a modern helicopter gunship – a tandem cockpit, stub wings for weapons, and a chin-mounted gun turret. After evaluating the Sioux Scout in early 1964, the Army was impressed, but also believed the Sioux Scout was too small, underpowered, unsophisticated, and fragile to be of practical use.[4]
[edit] AAFSS
Army's solution to the shortcomings of the Sioux Scout was to launch the Advanced Aerial Fire Support System (AAFSS) competition.[4]
The AAFSS requirement would give birth to the Lockheed AH-56 Cheyenne – a heavy battlefield helicopter that would prove to be over-ambitious, over-complex and over-budget, before being canceled 10 years later in 1972.[4] The Cheyenne program developed future technology and demonstrated some impressive performance, but was never made to work as a functional gunship. It served to underline an important rule of the combat helicopter – survival would be ensured only by the right mix of speed, agility and weapons.
[edit] Model 209
At the same time, despite the Army's preference for the AAFSS – for which Bell Helicopter was not selected to compete – Bell stuck with their own idea of a smaller and lighter gunship.[4] In January 1965 Bell invested $1 million to proceed with a new design.
Mating the proven transmission, rotor system, and the T53 turboshaft engine of the UH-1 with the design philosophy of the Sioux Scout, Bell produced the Model 209.[4] Bell's Model 209 largely resembled its "Iroquois Warrior" mockup.[3]
In Vietnam, events were also advancing in favor of the Model 209. Attacks on US forces were increasing, and by the end of June 1965 there were already 50,000 US ground troops in Vietnam.[4]
1965 was also the deadline for AAFSS selection, but the program was stuck in technical difficulties and political bickering. The U.S. Army needed an interim gunship for Vietnam and it asked five companies to provide a quick solution. Submissions came in for armed variants of the Boeing-Vertol ACH-47A, Kaman HH-2C Tomahawk, Piasecki 16H Pathfinder, Sikorsky S-61, and the Bell 209.[4]
On 3 September 1965 Bell rolled out the prototype, and four days later it made its maiden flight, only eight months from the go-ahead. In April 1966, the Model 209 won an evaluation against the other rival helicopters. Then the Army signed the first production contract for 110 aircraft.[4]
The Bell 209 demonstrator was used for the next six years to test weapons and fit of equipment. It had been modified to the match AH-1 production standard by the early 1970s. The demonstrator was retired to the Patton Museum at Fort Knox, KY and converted to approximately its original appearance.[3]
[edit] Into production
The Bell 209 design was modified for production. The retractable skids were replaced by simpler fixed skids. A new wide-blade rotor was featured. For production, a plexiglass canopy replaced the 209's armored glass canopy which was heavy enough to harm performance.[3]
[edit] Operational history
By June 1967, the first AH-1G HueyCobras had been delivered. Originally designated as UH-1H, the "A" for attack designation was soon adopted and when the improved UH-1D became the UH-1H, the HueyCobra became the AH-1G.[4] The AH-1 was initially considered a variant of the H-1 line, resulting in the G series letter.
Bell built 1,116 AH-1Gs for the US Army between 1967 and 1973, and the Cobras chalked up over a million operational hours in Vietnam.[4]
The AH-1 Cobras were in use by the Army during the Tet offensive in 1968 and through the end of the Vietnam War. Huey Cobras provided fire support for ground forces, escorted transport helicopters and other roles. They also formed "hunter killer" teams by pairing with OH-6A scout helicopters. A team featured one OH-6 flying slow and low to find enemy forces. If the OH-6 drew fire, the Cobra could strike at the then revealed enemy.[3]
Huey Cobras supported U.S. Marine operations during 1983 invasion of Grenada.
During the Gulf War of 1990-91, the Cobras and SeaCobras deployed in a support role. The Marines deployed 91 SeaCobras and the Army 140 Cobras. Three AH-1s were lost in accidents during fighting and afterwards.[3] U.S. Cobras were also used in operations throughout the 1990s.[3]
Cobra helicopter gunships were also used widely by the Israeli Air Force in the 1982 Lebanon War to destroy Syrian armor and fortification. IAF Cobras destroyed dozens of Syrian armored fighting vehicles, including many of the modern Soviet T-72 main battle tanks.
The Pakistan Army has also used the AH-1 as its primary gunship helicopter during the mid-1970s tribal uprising in Pakistan's Baluchistan province, where donated Iranian AH-1J were used against tribal insurgents.[citation needed] The recent insurgencies in the Waziristan regions has seen Pakistani AH-1s seeing action against Taliban & Al Qaeda fighters and their tribal allies, as well as operations against insurgents in another more recent Baluch tribal uprising recently led by armed Bugti and Marri tribesmen under the late Nawab Akbar Khan Bugti and the Balochistan Liberation Army since the mid-2000s.[citation needed]
AH-1 Cobras continue to operate with the US military, by the US Marine Corps notably in the ongoing conflict in Iraq. The US Army phased out the AH-1 during the 1990s and retired the AH-1 from active service in March 1999.[4][5] The Army retired the AH-1 from reserves in September 2001. The retired AH-1s have been passed to other nations and to the USDA Forest Service.[4]
The Israeli Air Force also operates the Cobra as the "Tzefa" (צפע), Hebrew for Viper,[6] with highly favorable reviews.
In 2003, the US Forest Service acquired 25 retired AH-1Fs from the US Army.[4] These have been designated Bell 209 and are being converted into Firewatch Cobras with infared and low light sensors and systems for real time fire monitoring.[7][8] The Florida Department of Forestry has also acquired 3 AH-1Ps from US Army. These are called Bell 209 "Firesnakes" and are equipped to carry a water/fire retardant system.[4]
[edit] Variants
[edit] Single-engined:
- Bell 209
- Original AH-1G prototype with retractable skid landing gear. This model number is also used by the FAA for the civilian registration of former U.S. Army AH-1s used in firefighting service.
- AH-1G HueyCobra
- Initial 1966 production model gunship for the US Army, with one 1,400shp Avco Lycoming T53-13 turboshaft.
- JAH-1G HueyCobra
- One helicopter for armament testing including Hellfire missiles and multi-barrel cannon.[9]
- TH-1G HueyCobra
- Two-seat dual-control trainer.[9]
- Z.14 HueyCobra
- Spanish Navy designation of the AH-1G.
- YAH-1Q
- Eight AH-1Gs with XM26 Telescopic Sight Unit (TSU) and two M56 TOW 4-pack launchers.[3]
- AH-1Q HueyCobra
- Equipped with the M65 TOW/Cobra missile subsystem, M65 Telescopic Sight Unit (TSU), and M73 Reflex sight. All future versions will be equipped with the TSU and be equipped to fire the TOW missile subsystem.
- YAH-1R
- AH-1G powered by a T53-L-703 engine without TOW system.[3]
- YAH-1S
- AH-1Q upgrade and TOW system.[3]
- AH-1S
- The baseline AH-1S is an AH-1Q upgraded with a 1,800 shp T53-L-703 turboshaft engine. The AH-1S is also referred to as the "Improved AH-1S", "AH-1S Modified", or "AH-1S(MOD)" prior to 1988. (Prior to 1988, all upgraded aircraft were referred to as variants of the AH-1S.)
- AH-1P
- 100 production aircraft with composite rotors, flat plate glass cockpit, and improved cockpit layout for nap-of-earth (NOE) flight. The AH-1P is also referred to as the "Production AH-1S", or "AH-1S(PROD)" prior to 1988. These improvements are considered Step 1 of the AH-1S upgrade program.
- AH-1E
- 98 production aircraft with the Enhanced Cobra Armament System (ECAS) featuring the M97A1 armament subsystem with a three-barreled M197 20 mm cannon. The AH-1E is also referred to as the "Upgunned AH-1S", or "AH-1S(ECAS)" prior to 1988. These improvements are considered Step 2 of the AH-1S upgrade program. AH-1E aircraft did not have the M147 Rocket Management Subsystem (RMS) and were unable to fire 2.75 inch rockets.
- AH-1F
- 143 production aircraft and 387 converted AH-1G Cobras. The AH-1F incorporates all Step 1 and 2 upgrades to the AH-1S as well as a return of the M147 RMS, an M143 Air Data Subsystem (ADS), a laser rangefinder and tracker, an infrared jammer mounted above the engine exhaust, and an infrared suppressing engine exhaust system. The AH-1F is also referred to as the "Modernized AH-1S", "AH-1S Modernized Cobra", or "AH-1S(MC)" prior to 1988.
- Model 249
- Experimental demonstrator version fitted with a four-bladed rotor system, an uprated engine and experimental equipment, including Hellfire missiles.[3]
- Bell 309 KingCobra
- Experimental version powered by one Lycoming T-55-L-7C engine.[10]
[edit] Twin-engined:
- For AH-1J, AH-1T, AH-1W, AH-1Z and other twin-engine variants, see AH-1 SuperCobra.
[edit] Operators
- See also: AH-1 SuperCobra for operators of AH-1J, AH-1T, AH-1W, AH-1Z and other twin-engine variants.
[edit] Current operators
- Bahrain Air Force acquired 24 AH-1Ps and 6 TAH-1P trainers.[3]
- Israeli Air Force has approximately 40 AH-1F "Tzefa" צפע ("Viper") in use.[3]
- Japan Ground Self-Defense Force received 2 AH-1Es[3] and 89 AH-1S Cobras license-manufactured by Fuji Heavy Industries from 1984 to 2000.[11]
- Jordanian Air Force received 24 AH-1Ss and 9 AH-1Fs.[3]
- Pakistan Army ordered 20 AH-1S Cobras and received 10 of those in 1984 (later upgraded to AH-1F). Ordered more AH-1Fs in 2004.[3] Currently has 20 AH-1S in use with 6 AH-1S Cobras being upgraded.[citation needed]
- Republic of Korea Army received 90 AH-1Fs (originally designated AH-1S).[3]
- Royal Thai Air Force received 4 AH-1Fs in 1990.[3] The RTAF has 3 AH-1Fs in use as of 2004.[4]
- Turkish Army received 32 used AH-1P/S. These were upgraded to AH-1F standards.[4]
- U.S. Forest Service (25 AH-1Fs, converting to Bell 209 Firewatch Cobras)[7]
- Florida Department of Forestry {3 AH-1Ps, converting to Bell 209 "Firesnakes")[4]
[edit] Former operators
- Spanish Navy Received 8 AH-1G.
- United States Army - Replaced by AH-64 Apache
- United States Marine Corps - used AH-1Gs prior to delivery of AH-1Js
[edit] Specifications
[edit] AH-1G HueyCobra
Data from Modern Military Aircraft[12]
General characteristics
- Crew: 2 - one pilot, one CPG (co-pilot/gunner)
- Length: 44 ft 5 in (13.4 m)
- Rotor diameter: 44 ft (13.4 m)
- Height: 13 ft 5 in (4.1 m)
- Empty weight: 6,073 lb (2,754 kg)
- Max takeoff weight: 9,500 lb (4,309 kg)
- Powerplant: 1× AVCO Lycoming T53-L-13 turboshaft, 1,100 shp (820 kW)
- Rotor system: 2 blades on main rotor
Performance
- Maximum speed: 190 knots (219 mph, 352 km/h)
- Range: 310 nmi (357 mi, 574 km)
- Service ceiling 11,400 ft (3,475 m)
- Rate of climb: 1,230 ft/min (6.25 m/s)
Armament
- 2 7.62mm multi-barrel Miniguns, or 2 M129 40mm Grenade launchers, or one of each, in the M28 turret
- 2.75in (70mm) rockets - 7 rockets mounted in the M158 launcher or 19 rockets in the M200 launcher
- M18 7.62 mm Minigun pod or XM35 armament subsystem with XM195 20mm cannon
[edit] AH-1F "Modernized" Cobra
General characteristics
- Crew: 2 - one pilot, one CPG (co-pilot/gunner)
- Length: 44 ft 7 in (13.6 m)
- Rotor diameter: ft (m)
- Height: 13 ft 5 in (4.1 m)
- Empty weight: 6,600 lb (2,993 kg)
- Max takeoff weight: 10,000 lb (4,500 kg)
- Powerplant: 1× AVCO Lycoming T53-L-703 turboshaft, 1,800 shp (1,300 kW)
- Rotor system: 2 blades on main rotor
Performance
- Maximum speed: 149 knots (172 mph, 277 km/h)
- Range: 274 nmi (315 mi, 510 km)
- Service ceiling 12,200 ft (3,720 m)
- Rate of climb: 1,620 ft/min (8.2 m/s)
Armament
- M197 3-barreled 20mm "Gatling-style" cannon in the M97 turret (750 rounds ammo capacity)
- 2.75in (70mm) rockets - 7 rockets mounted in the M260 launcher or 19 rockets in the M261 launcher[13]
- TOW Missiles - 4 or 8 missiles mounted in two-missile launchers on each hardpoint
[edit] See also
Related development
Comparable aircraft
Related lists
[edit] References
- ^ Wheeler 1987, p. 57-70.
- ^ Wheeler 1987, p. 60-61.
- ^ a b c d e f g h i j k l m n o p q r Bishop, Chris. Huey Cobra Gunships. Osprey Publishing, 2006. ISBN 1-84176-984-3.
- ^ a b c d e f g h i j k l m n o p q r Donald, David and March, Daniel. Modern Battlefield Warplanes. AIRtime Publishing Inc, 2004. ISBN 1-880588-76-5.
- ^ Army retires Cobras from active force, U.S. Army, March 31, 1999.
- ^ Bell AH-1 Huey-Cobra. Israeli Air Force. Retrieved on 2007-03-15.
- ^ a b Firewatch Helicopter page, US Forest Service, 2004.
- ^ Bell 209 Firewatch Cobra on USDA Forest Service site
- ^ a b Donald, David. The Complete Encyclopedia of World Aircraft. Barnes & Nobel Books, 1997. ISBN 0-7607-0592-5.
- ^ Model 309 Kingcobra / Model 409 AAH (YAH-63), Vectorsite.net
- ^ "Apache wins Japan deal", Flight International, 4 September5, 2001.
- ^ Gunston, Bill: The Illustrated Encyclopedia of the World's Modern Military Aircraft, page 205. Crescent Books, New York, NY USA, ca. 1978. ISBN 978-0-517-22477-9
- ^ U.S. Army Helicopter Weapon Systems
- Gunston, B.; Spick, M. (1986). Modern Fighting Helicopters. New York: Crescent Books, 104-05. ISBN 0-517-61349-2.
- (2004) International Air Power Review, Volume 12. AIRtime Publishing. ISBN 1-880588-77-3.
- Nolan, Keith W. (l986). Into Laos: Dewey Canyon II/Lam Son 719, Vietnam 1971. Presidio Press. ISBN 0891412476.
- Wheeler, Howard A. (l987). Attack Helicopters, A History of Rotary-Wing Combat Aircraft. The Nautical and Aviation Publishing Company. ISBN 0933852-52-5.
歡迎來到Bewise Inc.的世界，首先恭喜您來到這接受新的資訊讓產業更有競爭力，我們是提供專業刀具製造商，應對客戶高品質的刀具需求，我們可以協助客戶滿足您對產業的不同要求，我們有能力達到非常卓越的客戶需求品質，這是現有相關技術無法比擬的，我們成功的滿足了各行各業的要求，包括：精密HSS DIN切削刀具、協助客戶設計刀具流程、DIN or JIS 鎢鋼切削刀具設計、NAS986 NAS965 NAS897 NAS937orNAS907 航太切削刀具,NAS航太刀具設計、超高硬度的切削刀具、醫療配件刀具設計、汽車業刀具設計、電子產業鑽石刀具、木工產業鑽石刀具等等。我們的產品涵蓋了從民生刀具到工業級的刀具設計；從微細刀具到大型刀具；從小型生產到大型量產；全自動整合；我們的技術可提供您連續生產的效能，我們整體的服務及卓越的技術，恭迎您親自體驗！！
BW Bewise Inc. Willy Chen willy@tool-tool.com bw@tool-tool.com www.tool-tool.com skype:willy_chen_bw mobile:0937-618-190 Head &Administration Office No.13,Shiang Shang 2nd St., West Chiu Taichung,Taiwan 40356 http://www.tool-tool..com / FAX:+886 4 2471 4839 N.Branch 5F,No.460,Fu Shin North Rd.,Taipei,Taiwan S.Branch No.24,Sec.1,Chia Pu East Rd.,Taipao City,Chiayi Hsien,Taiwan
Welcome to BW tool world! We are an experienced tool maker specialized in cutting tools. We focus on what you need and endeavor to research the best cutter to satisfy users’ demand. Our customers involve wide range of industries, like mold & die, aerospace, electronic, machinery, etc. We are professional expert in cutting field. We would like to solve every problem from you. Please feel free to contact us, its our pleasure to serve for you. BW product including: cutting tool、aerospace tool .HSS DIN Cutting tool、Carbide end mills、Carbide cutting tool、NAS Cutting tool、NAS986 NAS965 NAS897 NAS937orNAS907 Cutting Tools,Carbide end mill、disc milling cutter,Aerospace cutting tool、hss drill’Фрезеры’Carbide drill、High speed steel、Milling cutter、CVDD(Chemical Vapor Deposition Diamond )’PCBN (Polycrystalline Cubic Boron Nitride) ’Core drill、Tapered end mills、CVD Diamond Tools Inserts’PCD Edge-Beveling Cutter(Golden Finger’PCD V-Cutter’PCD Wood tools’PCD Cutting tools’PCD Circular Saw Blade’PVDD End Mills’diamond tool ‘Single Crystal Diamond ‘Metric end mills、Miniature end mills、Специальные режущие инструменты ‘Пустотелое сверло ‘Pilot reamer、Fraises’Fresas con mango’ PCD (Polycrystalline diamond) ‘Frese’Electronics cutter、Step drill、Metal cutting saw、Double margin drill、Gun barrel、Angle milling cutter、Carbide burrs、Carbide tipped cutter、Chamfering tool、IC card engraving cutter、Side cutter、NAS tool、DIN or JIS tool、Special tool、Metal slitting saws、Shell end mills、Side and face milling cutters、Side chip clearance saws、Long end mills、Stub roughing end mills、Dovetail milling cutters、Carbide slot drills、Carbide torus cutters、Angel carbide end mills、Carbide torus cutters、Carbide ball-nosed slot drills、Mould cutter、Tool manufacturer.
ようこそＢｅｗｉｓｅ Ｉｎｃ.の世界へお越し下さいませ、先ず御目出度たいのは新たな
情報を受け取って頂き、もっと各産業に競争力プラス展開。
弊社は専門なエンド・ミルの製造メーカーで、客先に色んな分野のニーズ、
豊富なパリエーションを満足させ、特にハイテク品質要求にサポート致します。
弊社は各領域に供給できる内容は：
（３）鎢鋼エンド・ミル設計
（４）航空エンド・ミル設計
（５）超高硬度エンド・ミル
（７）医療用品エンド・ミル設計
弊社の製品の供給調達機能は：
（４）オートメーション整備調達
弊社の全般供給体制及び技術自慢の総合専門製造メーカーに貴方のご体験を御待ちしております。
BW специализируется в научных исследованиях и разработках, и снабжаем самым высокотехнологичным карбидовым материалом для поставки режущих / фрезеровочных инструментов для почвы, воздушного пространства и электронной индустрии. В нашу основную продукцию входит твердый карбид / быстрорежущая сталь, а также двигатели, микроэлектрические дрели, IC картонорезальные машины, фрезы для гравирования, режущие пилы, фрезеры-расширители, фрезеры-расширители с резцом, дрели, резаки форм для шлицевого вала / звездочки роликовой цепи, и специальные нано инструменты. Пожалуйста, посетите сайт www.tool-tool.com для получения большей информации.
BW is specialized in R&D and sourcing the most advanced carbide material with high-tech coating to supply cutting / milling tool for mould & die, aero space and electronic industry. Our main products include solid carbide / HSS end mills, micro electronic drill, IC card cutter, engraving cutter, shell end mills, cutting saw, reamer, thread reamer, leading drill, involute gear cutter for spur wheel, rack and worm milling cutter, thread milling cutter, form cutters for spline shaft/roller chain sprocket, and special tool, with nano grade. Please visit our web www.tool-tool.com for more info.
No comments:
Post a Comment